AirLink Communications RJ-11 Manual de usuario descargar pdf (Pagina 15)

AirLink Communications March 2007 15

Connecting to a RADES Over Cellular Networks with AirLink Devices

If you change the IP Address or the Netmask, click Save IP Address/Netmask.

The Serial Settings page allows you to specify the baud rate, protocol, character size, parity, stop

bits, and flow control behavior for the Host RJ-11 port (Phone).

FIGURE 23. Host RJ-11 IP Gateway: Serial Settings

FIGURE 24. Host RJ-11 IP Gateway: Reset/Reboot

Click the Reboot button to restart the Host RJ-11 IP Gateway with the configured settings.

Select Serial Settings from the menu on the left.

Note: For most configurations, the defaults for the settings are best. Change these

parameters only if you know the RSLINX you will be connecting to the Host RJ-

11 IP Gateway requires special settings.

Click on the Reset/Reboot menu option for the IP Address configuration and any changes to the

serial port settings to take effect.

1 2 ... 10 11 12 13 14 15 16

Sin comentarios

AirLink Communications RJ-11 Manual de usuario Pagina 15