AirLink Communications Raven X HSDPA Guía de usuario descargar pdf (Pagina 21)

Rev 2.0 Mar.10 13

3: Activating Raven X on AT&T

• Installing the SIM

• Configuring the

APN

This chapter provides step-by-step directions for activating your

Raven X on AT&T’s network.

Installing the SIM

The Subscriber Identity Module (SIM) in the Raven X is a smartcard

that securely stores the key identifying a cellular subscriber.

Generally, you will only need to install a SIM once in the life of the

modem and it may be pre-installed by your Sierra Wireless

Representative.

If the SIM was pre-installed, unless you need to set a custom APN,

activation of your modem is complete.

Cellular Account Required

• Cellular Account Required- To use your modem, you need to

have a SIM with an active account with your cellular provider.

Software Required

• ACEmanager - Graphical interface for entering most AT

Commands. You can download ACEmanager from the Sierra

Wireless AirLink Solutions website: http://

www.sierrawireless.com/support/. A default installation of this

utility is assumed later in these directions

Hardware Required

• Ethernet cable or serial cable - An Ethernet cable or straight

through serial cable.

• Serial cable - A straight through serial cable.

• Power adapter and a power source - You will need a power

supply and power source for the modem.

• PC or laptop - To configure the modem, you will need a

computer with an available Ethernet port or serial port.

Tools Required

• Small Phillips screw driver - The Phillips screw driver is the one

which is also called a plus (+) or X screw driver.

• Slim stylus - A PDA stylus, an unbent paperclip, or other such

item.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 34 35

Sin comentarios

AirLink Communications Raven X HSDPA Guía de usuario Pagina 21