AirLink Communications Raven X HSDPA Guía de usuario descargar pdf (Pagina 27)

Hardware Installation of the Raven X

Rev 2.0 Mar.10 19

Figure 4-3: Serial

The serial port of your Raven X can be connected directly to most computers or

other devices using a standard straight through cable. If you have a DCE device,

you will need a null modem or null modem cable.

Indicator Lights

When solid, Raven X indicates a successful connection. When your Raven X is

connected to power and an antenna, there is a specific pattern to the lights to

indicate its operation mode.

Figure 4-4: Raven X Indicator lights

•Network - Indicates a successful connection to the cellular network with an

IP address given and a channel acquired.

• Signal - Light shows the strength of the signal and may be nearly solid

(strong signal) or flashing (weaker signal). A slow flash indicates a very weak

signal.

•Activity - Lights will flash as data is transferred to and from the PinPoint

modem on the remote network.

• Service - Indicates when the connection is HSUPA/HSDPA or UMTS. Unlit

indicates EDGE or GPRS.

•Power - Indicates the power adapter is connected and there is power getting

to the Raven X.

RSSI LED Ranges

RSSI/Signal LED Status Ranges of RSSI (dBm)

On Solid Equal to or stronger than -69

Fast Blink -70 to -79

Normal blink -80 to -89

Slow Blink -90 to -99

Extinguished Equal to or weaker than -100

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 33 34 35

Sin comentarios

AirLink Communications Raven X HSDPA Guía de usuario Pagina 27