AirLink Communications Raven X HSDPA Guía de usuario descargar pdf (Pagina 6)

Sierra Wireless AirLink Solutions January 2009 6

Using a Sierra Wireless AirLink Raven X or Raven-E with a

Cisco Router

FIGURE 3. Wireless Ace: PPP/Ethernet

Public Mode

In this mode, the Raven X or Raven-E assigns the Cisco router the IP address it has received from

your cellular provider.

Set the *HOSTPRIVMODE to 0.

FIGURE 4. Wireless Ace: PPP/Ethernet

Raven X and Raven-E DHCP Server

If the Raven X or Raven-E is going to be placed on a network which has a DHCP server, the inter-

nal DHCP server of the modem can be disabled.

Set *DHCPSERVER to 2 - Enabled if no other DHCP server is detected.

FIGURE 5. Wireless Ace: DHCP

If you want to completely disable the DHCP server in the Raven X or Raven-E,

you can only do so by using a terminal application to connect to the modem and

using the *DHCPSERVER command to set it to 0. You cannot completely disable

the DHCP server in Wireless Ace.

When you have finished configuring the Ethernet settings, click the Write button on the tool bar

of Wireless Ace and wait for the message “Write Successful” to appear in the status bar.

1 - Use Private IP

192.168.13.30

192.168.13.31

255.255.255.0

0 - Use Public IP

1 2 3 4 5 6 7 8 9 10 11

Sin comentarios

AirLink Communications Raven X HSDPA Guía de usuario Pagina 6